1. Supporting plate
7. Holding the labeled parts of the side fences, adjust the fences to the paper size.
Set the paper flush against the protrusions in the bottom of the inner side fence. Make sure that
there is no space between the paper and the side fences.
Check that the positions of the scale numbers on the top of both of the side fences are almost the
same. When loading regular size paper, align the screw holes on the side fences to the paper size
mark.
8. Hold the inner side fence, and then tighten the screws to the inner side fence.
Fasten the front side fence in the same way.
Loading Paper into the Paper Tray
197
To Next Page
Loading...
