• Original Direction: Specify the orientation to place the originals.
• Original Setting: Specify the condition of the originals to copy (1 sided/2 sided
(page opening direction)).
• Print Side Setting: Select the finish from [Open to Right/Left] or [Open to Top].
4. Press [OK].
3. Place the original.
See "Placing an Original on the Scanner", User Guide (Full Version).
4. Press [Start].
When placing the originals on the exposure glass, press [Finish Scn] after scanning all of the
originals if necessary according to the setting contents and number of originals.
• You can specify the margins when copying a 1-sided original onto both sides of paper.
• See "Edit / Stamp", User Guide (Full Version).
• You cannot use the duplex copy function when the following paper types are selected:
• Tab Stock
• Translucent Paper
• Label Paper
• Recycled Paper
• Envelope
• You can change the setting contents of the two-sided copy key on the Copy screen.
• See "Others (Copier / Document Server Settings)", User Guide (Full Version).
• Use the [Series] function to copy the front and back sides of a two-sided original onto one side of a
sheet page by page.
• See "Copying Facing Pages of a Book Type Original or Two-sided Original", User Guide (Full
Version).
Duplex Copying
75
To Next Page
Loading...
