Specifying Reduce/Enlarge
1. Press the [Home] key.
2. Press the [Copier] icon on the [Home] screen.
3. Press [Reduce/Enlarge].
4. Select a ratio from the list or enter the ratio you require. Also, you can specify the ratio by
pressing [+] or [-] in increments of 1%.
5. Press [OK].
• You can change the machine's default [Reduce/Enlarge] setting to always make photocopies in
the specified ratio. For details, see page 217 "Copier Settings".
• Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Reset Timer] while the
initial screen is displayed. For details, see page 251 "Administrator Tools Settings".
• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
4. Copying Originals
106
To Next Page
Loading...
