EasyManua.ls Logo

Ricoh M C251FW - Canceling a Print Job

Ricoh M C251FW
448 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
You can specify which paper tray is selected first in [Paper Tray Priority] under [Paper Settings]
when the trays are automatically selected while you are printing. For details about [Paper Tray
Priority], see page 246 "Paper Settings".
If a paper jam occurs, printing stops after the current page has been printed out. After the jammed
paper is removed, printing restarts from the jammed page automatically. For details about how to
remove the jammed paper, see page 357 "Removing Paper Jams".
When Using macOS
The procedure in this section is an example based on macOS 11.2.3. The actual procedure may vary
depending on the operating system you are using.
1. Open the printer properties dialog box in your document's application.
For details, see page 86 "Displaying the printing preferences dialog box in an application when
using macOS".
2. Set printing options as necessary, and then click [OK].
The printer properties dialog box closes.
3. Click [Print].
When printing a job (Color/B&W or B&W only) is restricted, specify the user code in the printer
properties of the printer driver before printing. For details about user code, see page 289
"Restricting Machine Functions According to User".
You can specify which paper tray is selected first in [Paper Tray Priority] under [Paper Settings]
when the trays are automatically selected while you are printing. For details about [Paper Tray
Priority], see page 246 "Paper Settings".
If a paper jam occurs, printing stops after the current page has been printed out. After the jammed
paper is removed, printing restarts from the jammed page automatically. For details about how to
remove the jammed paper, see page 357 "Removing Paper Jams".
If a Paper Mismatch Occurs
The machine reports an error if:
The paper type does not match the print job's settings when [Input Tray:] is set to [Auto Tray Select]
on the printer driver.
There are two ways to resolve these errors:
Continue printing using mismatched paper
Ignore the error and print using mismatched paper.
3. Printing Documents
88

Table of Contents

Related product manuals