Scanner Mode Screen
This section provides information about the screen in scanner mode.
Screen in standby mode
1. Current status or messages
Displays the current status or messages.
2. Email / Folder / FTP / USB
Press these tabs to switch between the [Email] screen, [Scan to Folder] screen, [Scan to FTP] screen, and [Scan
to USB] screen.
• When [Email] is selected, you can specify e-mail destinations.
• When [Folder] is selected, you can specify folder destinations.
• When [FTP] is selected, you can send scanned documents to an FTP server.
• When [USB] is selected, you can save scanned files to the USB flash memory device inserted into the
machine.
3. Information icon
Press to check the information.
4. Favorite item icon
Press to register current settings to a favorite item.
5. Original Settings
Allows you to specify original settings.
6. Scan Settings
Allows you to specify scan settings.
7. Resend
Press this to specify the last used destination as the destination for the current job.
Scanner Mode Screen
125
To Next Page
Loading...
