HTTPS/HTTP
Item Description
Force To Use HTTPS Specify whether or not to make the use of HTTPS mandatory. If this is
enabled, the connection to HTTP Port 80 is automatically redirected to Port
443. Furthermore, if the user accesses the web page by entering the URL
"http://...", the access is redirected to "https://...".
Note that Port 80 cannot be used for IPP printing.
mDNS Setting
Item Description
mDNS Select to enable Multicast DNS (via UDP port 5353). If disabled, the item
below cannot be configured.
Printer Name Enter the name of the machine. Can contain up to 32 characters.
TLS Security Tab
TLS Security Level Settings
Item Description
TLS Level Select the TLS security level from [High], [Medium] or [Low].
TLS1.3 Specify whether or not to enable TLS 1.3.
If [TLS Level] is set to [High], this setting is automatically enabled and
cannot be disabled.
If [TLS Level] is set to [Medium] or [Low], this setting can be enabled/
disabled manually.
TLS1.2 Specify whether or not to enable TLS 1.2.
If [TLS Level] is set to [High], this setting is automatically disabled and
cannot be enabled.
If [TLS Level] is set to [Medium] or [Low], this setting can be enabled/
disabled manually.
TLS1.1 Specify whether or not to enable TLS 1.1.
If [TLS Level] is set to [High] or [Medium], this setting is automatically
disabled and cannot be enabled.
If [TLS Level] is set to [Low], this setting can be enabled/disabled manually.
8. Configuring the Machine Using Utilities
298
To Next Page
Loading...
