Settings You Can Configure in the ICA Dialog Box
ECC271
13 12 11
10
9
8
7
6
5
4
3
21
1. Scan Mode:
Select where the original is placed.
• Flatbed
If the original is placed on the exposure glass, select [Flatbed].
• Document Feeder
If the original is placed in the ADF, select [Document Feeder].
2. Kind:
Set the type of original to [Text], [Black & White], or [Color].
[Text] is suitable for scanning originals containing mainly text.
3. Resolution:
Select a resolution from the list.
Note that increasing the resolution also increases the file size and scanning time.
Selectable resolutions vary depending on where the original is set.
• When using the exposure glass:
75, 100, 150, 200, 300, 400, 500, 600, 1200, 2400, 4800 dpi
• When using the ADF:
75, 100, 150, 200, 300, 400, 500, 600 dpi
4. Size:
Specify the original paper size.
If [Scan Mode:] is set to [Flatbed] and the [Use Custom Size] is checked, you can specify the width and height
of the original to be scanned in [Size]. You can specify these dimensions in pixels, inches, or centimeters.
If [Scan Mode:] is set to [Document Feeder], select the original size and orientation.
5. Rotation Angle: (This appears only if [Use Custom Size] is checked.)
You can specify how many degrees to rotate the scan image clockwise.
Basic Operation for ICA Scanning
161
To Next Page
Loading...
