Item Description
WEP Key Enter the WEP key. The number and type of characters you can enter vary
depending on the length and format selected for the key. See the following:
• WEP key length: [64bit], Format: [Hexadecimal]
WEP key max length: 10 characters (0-9, A-F, a-f)
• WEP key length: [64bit], Format: [ASCII]
WEP key max length: 5 characters (0x20-0x7e)
• WEP key length: [128bit], Format: [Hexadecimal]
WEP key max length: 26 characters (0-9, A-F, a-f)
• WEP key length: [128bit], Format: [ASCII]
WEP key max length: 13 characters (0x20-0x7e)
• When [Wireless] is set to [Active], [Wireless LAN Settings] appears and you can change the
settings there.
• If you are configuring the connection settings manually, check the SSID, authentication method, or
encryption key of the access point or wireless router in advance.
Wi-Fi Direct Settings
Item Description
Wi-Fi Direct Type Select 2.4 GHz or 5 GHz as the wireless LAN frequency.
SSID Enter the SSID name.
The SSID can contain up to 32 characters.
WPA Passphrase Enter the passphrase for Wi-Fi Direct connection. You can enter 8 to 32
characters for a passphrase.
• When [Wireless] is set to [Active], [Wi-Fi Direct Settings] appears and you can change the settings
there.
Certificate Tab
You can use the following two types of certificates on this machine:
• Certificates created by the machine.
8. Configuring the Machine Using Utilities
308
To Next Page
Loading...
