Item Description
SNMPv3 Account 1 Select either [User Account] or [Admin Account].
SNMPv3 Management
Host 1
Enter the IP address or host name of a management host. Can contain up to
64 characters.
SNMPv3 Account 2 Select either [User Account] or [Admin Account].
SNMPv3 Management
Host 2
Enter the IP address or host name of a management host. Can contain up to
64 characters.
SMTP Tab
SMTP
Item Description
Primary SMTP Server Enter the IP address or host name of the SMTP/POP3 server. Can contain
up to 64 characters.
SSL/TLS Select whether or not to apply SSL/TLS encryption when sending emails to
the SMTP server. Check the box to enable SSL/TLS.
Port No. Enter the port number for SMTP (1 to 65535).
If [SSL/TLS] is checked, Port 465 is automatically selected. (Otherwise, Port
25 is selected by default.)
Authentication Method Select an authentication method from the following:
[Anonymous]: The user name and password are not necessary.
[SMTP]: The machine supports NTLM and LOGIN authentication.
[POP before SMTP]: The POP3 server is used for authentication. When
sending e-mails to an SMTP server, you can enhance the SMTP server
security level by connecting to the POP server for authentication.
User Name Enter the user name for logging in to the SMTP server. Can contain up to 32
characters.
Password Enter the password for logging in to the SMTP server. Can contain up to 32
characters.
Device E-mail Address Enter the machine’s e-mail address.
This address is used as the sender's address of e-mail messages sent from
this machine, such as notification e-mails. Can contain up to 64 characters.
8. Configuring the Machine Using Utilities
304
To Next Page
Loading...
Need help?
General
Weight and Dimensions
