Admin Account
Item Description
User Name
(Required)
Enter the user name for logging in to the SNMPv3. Can contain up to 32
characters.
Security Settings Specify the user account security setting by selecting one of the following:
[Authentication Encryption]: It is necessary to specify [Authentication
Algorithm], [Authentication Password], [Encryption Algorithm], and
[Encryption Password].
[Authentication Non-Encryption]: It is necessary to specify [Authentication
Algorithm] and [Authentication Password]. [Encryption Algorithm] and
[Encryption Password] cannot be specified.
[Non-Authentication Non-Encryption]: [Authentication Algorithm],
[Authentication Password], [Encryption Algorithm] and [Encryption
Password] cannot be specified.
Authentication
Algorithm
Specify the authentication algorithm from the following:
[MD5], [SHA1], [SHA224], [SHA256], [SHA384], [SHA512]
Authentication
Password
(Required)
Enter a password for the Admin account. Can contain up to 32 characters.
Encryption Algorithm Specify the encryption algorithm from the following:
[AES128], [DES]
Encryption Password
(Required)
Enter a password for encrypting the Admin account password.
Can contain up to 32 characters.
MIB Access Type Select an access type for the administrator account to access MIB from the
following:
[read-only], [write-only], [read-write], [Not-Accessible]
SNMPv3 Trap
Item Description
SNMPv3 Trap Select whether to enable the machine to send SNMPv3 traps to the
management host (NMS).
When disabled, [SNMPv3 Management Host 1] and [SNMPv3
Management Host 2] below become unavailable.
Configuring the Network Settings
303
To Next Page
Loading...
