• You can change the machine's default [Duplex/Combine] setting to always make photocopies in
the specified ratio. For details, see page 217 "Copier Settings".
• Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Reset Timer] while the
initial screen is displayed. For details, see page 251 "Administrator Tools Settings".
• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
Copying Single-Sided Originals with 2-Sided and Combined Printing
111
To Next Page
Loading...
