[Black and White Photo]
[Color Document-Faster]
[Color Document-Better Quality]
[Custom...]
• When using the ADF:
[ADF-Faster]
[ADF-Better]
[ADF-Gray]
[Custom...]
4. Scn. Mode:
Select from [Full Color], [Grayscale], [Black and White].
5. Resolution:
Select a resolution from the list.
100, 200, 300, 600 dpi
6. Size:
Select the scanning size from the list. If you select [Exposure Glass] in [Original:] and select [User
defined] in [Size:], enter the scanning size directly in the edit box. Also, you can change the scanning
size with your mouse in the preview area. You can select the unit of measure from [cm], [inches], or
[pixels].
• [Duplex] appears only when you select [Automatic Document Feeder] in [Original:]. Select the
check box when scanning both sides of the original, and then specify the orientation.
Basic Operation for RICOH Scan Utility V2
153
To Next Page
Loading...
