Receiving a fax using the control panel
1. Press the [Home] key.
2.
Press the [Setting] icon on the [Home] screen.
3. Press [Fax Settings].
4. Press [Reception Settings].
5. Press [ ] twice.
6. Press [Manual POP].
7. In the confirmation screen, press [Yes].
The machine checks for new e-mails and downloads them if there is any.
Receiving a fax using Web Image Monitor
1. Start the Web browser, and access the machine by entering its IP address.
The top page of Web Image Monitor appears.
2. Click [Network Settings].
3. Click the [Internet Fax] tab.
4. Select "Automatic POP" to [Active] or [Inactive].
[Active]: Automatic reception
[Inactive]: Manual reception
5. Enter the administrator password.
6. Click [OK].
7. Close the Web browser.
For details about using Web Image Monitor, see page 270 "Using Web Image Monitor".
Receiving a Fax
205
To Next Page
Loading...
