8. Press [Print Received File].
9. Select [On] or [Off].
• [On]: Automatically print out the received faxes and delete from memory.
• [Off]: Store the received faxes in memory for later manual printing.
If you select [On], proceed to the next step. If you select [Off], press [OK], and then proceed to
Step 11.
10. Enter the start time and the end time, and then press [OK].
The machine prints out the received faxes and delete from memory within the specified time.
11. Press the [Home] key.
• When the fax is successfully printed out, it will be deleted from memory.
• If the machine is unable to print out a fax due to machine errors such as an empty paper tray or a
paper jam, the fax will remain in memory. The remaining pages will start printing as soon as the
problem is resolved.
Printing out faxes stored in memory
This section explains how to print out received faxes stored in the machine's memory.
If the Data-In indicator is flashing, there is a fax in machine's memory. Follow the procedure below to
print the fax.
1. Press the [Home] key.
2. Press the [Fax] icon on the [Home] screen.
3. Press [RX File].
4. Select the file, and then press [Print].
5. Press [Yes].
The machine prints out the stored fax and deletes it from memory.
6. Press the [Home] key.
Receiving a Fax
209
To Next Page
Loading...
