2. Click [Special Sender].
3. From the [Destination Type] list, select [Special Sender].
4. Select the Special Sender number from the list (1 to 30).
5. Enter the Special Sender’s fax number (up to 20 characters).
6. Enter the administrator password.
7. Click [OK].
8. Close the Web browser.
• A fax number can contain 0 to 9, , and space.
Limiting the incoming faxes
This section explains how to set the machine to receive (or reject) faxes only from the programmed
Special Senders.
1. Start the Web browser, and access the machine by entering its IP address.
The top page of Web Image Monitor appears.
2. Click [System Settings].
3. Click the [Fax] tab.
4. For [Authorized Reception], click [Active].
Receiving a Fax
211
To Next Page
Loading...
