Item Description Value
Reception
Speed
Specifies the reception speed for the
fax modem.
• 33.6 Kbps
• 14.4 Kbps
• 9.6 Kbps
• 7.2 Kbps
• 4.8 Kbps
• 2.4 Kbps
Default: [33.6 Kbps]
JBIG Enables transmission and reception of
JBIG-compressed images.
Note that to use this function, [ECM
Transmission] and [ECM Reception]
must also be enabled.
This function is not available with
Internet Fax.
• Inactive
• Active
Default: [Active]
Report Print Setting
Item Description Value
Print TX Status Sets the machine to print a transmission
report automatically after a fax
transmission.
When the machine is in Immediate
Transmission mode, the image of the
original will not be reproduced on the
report, even if [Error Only(Image)] or
[Every TX (Image)] is selected.
Note that if a memory error occurs for
LAN-Fax transmission, a transmission
report will always be printed
regardless of this setting.
The transmission report will be printed
on A4 or Letter size paper.
• Error Only
Prints a report when a
transmission error occurs.
• Error Only(Image)
Prints a report with an image of
the original when transmission
error occurs.
• Every TX
Prints a report for every fax
transmission.
• Every TX (Image)
Prints a report with an image of
the original for every fax
transmission.
• Do not Print
Default: [Every TX (Image)]
7. Configuring the Machine Using the Control Panel
230
To Next Page
Loading...
