Item Description Value
Resolution Specifies the resolution to use for
scanning originals.
"Photo" resolution is not available for
Internet Faxes. Faxes will be sent using
"Detail" resolution if "Photo" resolution
has been specified.
• Standard
Select this when the original is a
printed or typewritten document
with normal-sized characters.
• Detail
Select this when the original is a
document with small print.
• Photo
Select this when the original
contains images such as
photographs or shaded
drawings.
Default: [Standard]
Density Specifies the image density to use for
scanning originals.
Press [ ] to increase the density.
Default: The default setting is the
middle of 3 adjustment levels.
Pause Time Specifies the length of pause time
when a pause is inserted between the
digits of a fax number.
1 to 15 seconds
Default: 3 seconds
Auto Redial Sets the machine to redial the fax
destination automatically when the line
is busy or a transmission error occurs, if
the machine is in Memory Transmission
mode. The number of redial attempts is
preset to two or three times, depending
on the [Country/Region] setting under
[Administrator Tools], in five-minute
intervals.
• Off
• On
Default: [On]
Print Fax
Header
Sets the machine to add a header to
every fax you send. The header
includes the current date and time, user
fax name and fax number of the
machine, job ID, and page
information.
• Off
• On
Default: [On]
7. Configuring the Machine Using the Control Panel
232
To Next Page
Loading...
