9. Click [Apply].
10. Close the Web browser.
Deleting user entries
This section explains how to delete user entries.
1. Start the Web browser, and access the machine by entering its IP address.
The top page of Web Image Monitor appears.
2. Click [Restrict Available Functions].
3. Enter the administrator password.
4. Click [Apply].
5. Click [Available Functions per User].
A list of currently registered user entries appears.
6. Select the entry to delete, and then click [Delete].
7. Confirm that the entry you have selected is the entry that you want to delete.
8. Enter the administrator password.
9. Click [Apply].
10. Close the Web browser.
8. Configuring the Machine Using Utilities
292
To Next Page
Loading...
