Ricoh M C251FW - Page 354

Message Causes Solutions
Memory Overflow • If you try to print a Locked
Print file stored in the
machine with the printer
driver's [Gradation:] set to
[Fine] in the [Print Quality]
tab, printing may be
canceled depending on
the machine's current
memory usage.
• Print or delete other Locked Print files
in the machine, and then print the
Locked Print file that the machine
failed to print. Alternately, resend the
Locked Print file to the machine with
[Gradation:] set to [Speed] or
[Standard], and then print the Locked
Print file.
Memory Overflow • The machine's memory
reached capacity while
scanning the first page of
the original to store a fax
job in memory before
transmission.
• The machine's memory
reached capacity while
storing a fax in memory in
Memory Transmission
mode.
Resend the fax in parts as several smaller
individual faxes, or send at a lower
resolution.
Misfeed: Duplex Unit
Remove Paper
Paper has been jammed in the
duplex unit.
Remove the jammed paper. See
page 357 "Removing Paper Jams".
Misfeed: Paper Tray Paper has been jammed in the
paper tray.
Remove the jammed paper. See
page 357 "Removing Paper Jams".
Misfeed: Standard
Tray
Paper has been jammed in the
paper exit area.
Remove the jammed paper. See
page 357 "Removing Paper Jams".
Misfeed: Tray 1 Paper has been jammed in the
tray 1 paper input area.
Remove the jammed paper. See
page 357 "Removing Paper Jams".
Misfeed: Tray 2 Paper has been jammed in the
paper tray.
Remove the jammed paper. See
page 357 "Removing Paper Jams".
Net Communication
Error
Connection with the server was
lost while sending or receiving
data.
Contact the network administrator.
10. Troubleshooting
352