Ricoh M C251FW - Other Printing Problems

Problem Solution
The message "Processing..." does not
appear on the control panel after
printing.
If the message "Processing..." does not appear on the control
panel after printing, the printer has not received the data.
If the printer is connected to the computer using the interface
cable.
Check the port connection setting is correct.
Network Connection
Contact your network administrator.
Black gradation is not natural.
Only when using PostScript 3
Select [CMY + K] for [Gray Reproduction] in the printer
driver's dialog box.
See the printer driver Help.
Solid lines are printed as broken
lines.
Only when using PostScript 3
Change the [Dithering] setting in the printer driver's
dialog box.
See the printer driver Help.
Fine dot patterns do not print.
Only when using PostScript 3
Change the [Dithering] setting in the printer driver's
dialog box.
See the printer driver Help.
Solid areas, lines or text are shiny or
glossy when created as a mixture of
cyan, magenta, yellow.
Only when using PostScript 3
Select [Black by K] for [Gray Reproduction] in the printer
driver's dialog box.
See the printer driver Help.
Speckling occurs in areas of solid
black print.
Only when using PostScript 3
Select [CMY + K] for [Gray Reproduction] in the printer
driver's dialog box.
See the printer driver Help.
Printer Problems
381