Ricoh M C251FW - Appendix; Transmission Using IPsec; Encryption and Authentication by IPsec

3. Press the [Home] key.
ECC202
4. Press the [Setting] icon on the [Home] screen.
5. Press [Network Settings].
6. Enter the password using the number keys, and then press [OK].
You can display the software keyboard by double tapping the entry area on the display.
A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock]
under [Administrator Tools] menu.
7. Press [Wi-Fi Enable].
8. Press [Enable].
9. Turn off the machine, and then turn it back on.
10. Press the wireless LAN icon.
11. Enter the password using the number keys, and then press [OK].
You can display the software keyboard by double tapping the entry area on the display.
A password for accessing the [Wi-Fi Configuration] menu can be specified in [Admin. Tools Lock]
under [Administrator Tools] menu.
12. Press [WPS].
13. Press [PIN].
14. Check the PIN code.
Write down the PIN code in case you might forget it.
15. Enter the machine's PIN code (8 digits) on the router (access point)'s web page (The web
page accessed in Step 2).
16. Execute WPS (PIN system) from the router (access point)'s web page.
17. Press [Connect].
"Please wait for 2 minutes" and connecting with PIN method starts.
18. Check the result.
• Connection has succeeded:
Connecting the Machine to a Wireless Network
405