Ricoh M052 - Page 297

System SP5-xxx
SM 5-75 M052/M053/M054
System
Maintenance
Reference
091
Default for JPEG
[5 to 95 / 50 / 1 /step]
Sets the JPEG format default for documents sent to the document
management server via the MLB with JPEG selected as the format.
Enabled only when optional MLB (Media Link Board) is installed.
101 Primary srv IP address
Sets the IP address for the primary capture server.
This is basically adjusted by the remote system.
102 Primary srv scheme This is basically adjusted by the remote system.
103
Primary srv port
number
This is basically adjusted by the remote system.
104 Primary srv URL path This is basically adjusted by the remote system.
111
Secondary srv IP
address
Sets the IP address for the secondary capture
server. This is basically adjusted by the remote
system.
112 Secondary srv scheme This is basically adjusted by the remote system.
113
Secondary srv port
number
This is basically adjusted by the remote system.
114
Secondary srv URL
path
This is basically adjusted by the remote system.
120
Default Reso Rate
Switch
This is basically adjusted by the remote system.
122
Reso: Copy (Mono)
[0 to 5 / 3 / 1/step]
Selects the resolution for BW copy mode. This is basically adjusted by the
remote system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi