Ricoh M199 - Page 119

Service Menu
M199/M200/M203/M204 4-4 SM
2nd Transfer
Fuser Temp.
Media Type
Sets the Media type.
Plain paper, Thick Paper 2, Middle Thick Paper,
Thick Paper 1, Recycled Paper, Color Paper,
Letterhead, Preprinted Paper, Prepunched Paper,
Label Paper, Bond Paper, Cardstock, Envelope,
Thick Post, Thin Paper
2nd Transfer
Front
Adjusts the transfer roller current, based on the
default value.
[-15 to 15 / 0 (Default) / 1
A/step]
2nd Transfer
Back
Adjusts the transfer roller current, based on the
default value.
[-15 to 15 / 0 (Default) / 1
A/step]
Fuser
Temperature
Adjusts the temperature of the fusing unit, based
on the default value.
[-30 to 0 / 0 (Default) / 2°C/step]
Registration
Horiz. Tray1
Adjusts the horizontal registration for tray 1. If the
machine settings are reset to the factory defaults,
this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Vert.Tray1
Adjusts the vertical registration for tray 1. If the
machine settings are reset to the factory defaults,
this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Horiz.Tray2
Adjusts the horizontal registration for tray 2. If the
machine settings are reset to the factory defaults,
this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Vert.Tray2
Adjusts the vertical registration for tray 2. If the
machine settings are reset to the factory defaults,
this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]