Ricoh MLP150DN Operaing Instructions

Specifying a paper type
This section describes how to specify a paper type. You can improve printer performance by selecting the
optimum paper type for the tray.
1. Press the [Menu] key.
BEK204S
2. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Paper Type: LCT], and then press the [OK] key.
4. Press the [ ] or [ ] key to select the paper type that is loaded, and then press the [OK] key.
About two seconds later, the display returns to the [Paper Input] screen.
5. Press the [Menu] key.
The display returns to the initial screen.
• The tray does not support envelopes and OHP transparencies.
Loading Paper
101
5

Ricoh MLP150DN Specifications

General

Brand	Ricoh
Model	MLP150DN
Category	Printer
Language	English