EasyManuals Logo

Ricoh MLP150DN Operaing Instructions

Ricoh MLP150DN
228 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
Loading Paper
This section describes how to load paper into the paper tray or onto the bypass tray.
Do not add paper to a tray before it runs out of paper. If you do so, multiple sheets of paper may be fed
at one time, which results in a paper jam.
500-sheet Paper Feed Trays
The following example explains how to load paper into paper trays, and how to change paper size.
The same procedure can be used for all trays. Tray 1 is used as an example.
Make sure paper is not stacked higher than the upper limit mark inside the paper tray. Paper misfeeds
might occur.
Do not mix different types of paper in the same paper tray.
During printing, do not open or close the printer covers or bypass tray, or pull out or push in the paper
tray.
1. Carefully pull out the paper tray until it stops.
BEK246S
When printing using the bypass tray, do not pull out the paper tray.
Loading Paper
89
5

Table of Contents

Other manuals for Ricoh MLP150DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh MLP150DN and is the answer not in the manual?

Ricoh MLP150DN Specifications

General IconGeneral
BrandRicoh
ModelMLP150DN
CategoryPrinter
LanguageEnglish

Related product manuals