USB Cable Connection
• For users outside the United States of America: properly shielded and grounded cables and connectors
must be used for connections to a host computer (and/or peripheral) in order to meet emission limits.
• For users in the United States of America: properly shielded and grounded cables and connectors
must be used for connections to a host computer (and/or peripheral) in order to meet FCC emission
limits.
• USB connection is possible under Windows 2000/XP/ Vista, Windows Server 2003/2003 R2,
Mac OS 9.x, and Mac OS X.
• USB connection with Mac OS is only possible via the printer's USB port, not the Gigabit Ethernet
board's USB port.
• A USB cable is not supplied with this printer. Select your cable according to the computer.
• The printer's USB port is not available when the Gigabit Ethernet board is attached to the printer.
Connecting to the standard USB port
1. Connect the square-shaped connector of the USB cable to USB port B on the left side of the
printer.
2. Connect the opposite end's flat connector to the desired device such as your computer's USB
interface, or a USB hub.
3. Connecting the Printer Cables
52
To Next Page
Loading...
Need help?
General
