Ricoh MLP150DN Operaing Instructions

Removing Punch Waste
"The punch hole receptacle is full." or "Empty the punch receptacle." message appears, remove punch
waste from the finisher. When these messages appear on the display, you cannot use the punch function.
When the 2 Tray Finisher is Installed
1. Open the front cover of the finisher.
BEK110S
2. Pull out the punch waste box carefully, and then remove punch waste.
BEK120S
3. Re-install the punch waste box.
BEK126S
Removing Punch Waste
173
9

Ricoh MLP150DN Specifications

General

Brand	Ricoh
Model	MLP150DN
Category	Printer
Language	English