6. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
7. Press the [ ] or [ ] key to select [Paper Size: Bypass Tray], and then press the [OK] key.
8. Select the paper size you want to set using the scroll keys, and then press the [OK] key.
About two seconds later, the display returns to the [Paper Input] screen.
9. Press the [Menu] key.
The display returns to the initial screen.
• Make sure paper is not stacked higher than the paper guides inside the bypass tray.
• Be sure to select the appropriate paper type when you load labels, thick paper, envelopes, or OHP
transparencies in the bypass tray.
5. Paper and Other Media
104
To Next Page
Loading...
Need help?
General
