Ricoh MP C2003 Series User Manual

Enabling and Disabling Protocols
Specify whether to enable or disable the function for each protocol. By making this setting, you can
specify which protocols are available and so prevent unauthorized access over the network. Network
settings can be specified on the control panel or by using Web Image Monitor, telnet,
SmartDeviceMonitor for Admin/Device Manager NX Lite or Remote Communication Gate S. In the case
of SmartDeviceMonitor for Admin/Device Manager NX Lite, use it to start Web Image Monitor and
configure the settings from there.
Protocol Port Setting method When disabled
IPv4 - • Control panel
• Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Device Manager NX
Lite
• Remote
Communication Gate S
All applications that operate over
IPv4 cannot be used.
IPv4 cannot be disabled from Web
Image Monitor when using IPv4
transmission.
IPv6 - • Control panel
• Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Device Manager NX
Lite
• Remote
Communication Gate S
All applications that operate over
IPv6 cannot be used.
IPsec - • Control panel
• Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Device Manager NX
Lite
Encrypted transmission using IPsec is
disabled.
5. Enhanced Network Security
116

Ricoh MP C2003 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Size	A3
Copy Resolution	600 x 600 dpi
Duplex Printing	Yes
Print Technology	Laser
Print Speed	20 ppm (A4)
Scanner Resolution	600 dpi
Network Connectivity	Ethernet
Functions	Print, Copy, Scan
Operating System Compatibility	Windows, Mac, Linux
Scan Speed	54 images per minute
Control Panel	9-inch color touchscreen