Ricoh MP C2003 Series User Manual

Restricting a Customer Engineer Operation
You can restrict the customer engineer's access to the service mode.
Service mode is used by a customer engineer for inspection or repair. If you set "Service Mode Lock" to
[On], service mode cannot be used unless the machine administrator logs on to the machine and
cancels the service mode lock to allow a customer engineer to operate the machine for inspection and
repair. This ensures that the inspection and repair are done under the supervision of the machine
administrator.
1. Log in as the machine administrator from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next] twice.
5. Press [Service Mode Lock].
6. Press [On], and then press [OK].
7. Press [Yes].
8. Log out.
Restricting a Customer Engineer Operation
267

Ricoh MP C2003 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Size	A3
Copy Resolution	600 x 600 dpi
Duplex Printing	Yes
Print Technology	Laser
Print Speed	20 ppm (A4)
Scanner Resolution	600 dpi
Network Connectivity	Ethernet
Functions	Print, Copy, Scan
Operating System Compatibility	Windows, Mac, Linux
Scan Speed	54 images per minute
Control Panel	9-inch color touchscreen