Ricoh MP C2003 Series User Manual

Protocol Port Setting method When disabled
HTTP TCP:80 • Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Device Manager NX
Lite
Functions that require HTTP cannot
be used.
Cannot print using IPP on port 80.
HTTPS TCP:443 • Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Device Manager NX
Lite
Functions that require HTTPS cannot
be used.
@Remote cannot be used.
You can also make settings to require
SSL transmission using the control
panel or Web Image Monitor.
SMB TCP:139 • Control panel
• Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Device Manager NX
Lite
• Remote
Communication Gate S
SMB printing functions cannot be
used.
NBT UDP:137
UDP:138
• telnet SMB printing functions via TCP/IP,
as well as NetBIOS designated
functions on the WINS server cannot
be used.
SNMPv1,v2 UDP:161 • Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Device Manager NX
Lite
• Remote
Communication Gate S
Functions that require SNMPv1, v2
cannot be used.
Using the control panel, Web Image
Monitor or telnet, you can specify
that SNMPv1, v2 settings are read-
only, and cannot be edited.
5. Enhanced Network Security
118

Ricoh MP C2003 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Size	A3
Copy Resolution	600 x 600 dpi
Duplex Printing	Yes
Print Technology	Laser
Print Speed	20 ppm (A4)
Scanner Resolution	600 dpi
Network Connectivity	Ethernet
Functions	Print, Copy, Scan
Operating System Compatibility	Windows, Mac, Linux
Scan Speed	54 images per minute
Control Panel	9-inch color touchscreen