Ricoh MP C2003 Series User Manual

Setting Description Setting value
Authentication Method
Specify the method for
authenticating transmission
partners.
(auto setting)
• PSK
• Certificate
If you specify "PSK", you must
then set the PSK text (using
ASCII characters).
If you are using "PSK", specify
a PSK password using up to
32 ASCII characters.
If you specify "Certificate", the
certificate for IPsec must be
installed and specified before
it can be used.
PSK Text
Specify the pre-shared key for
PSK authentication.
Enter the pre-shared key
required for PSK
authentication.
Phase 1
Hash Algorithm
Specify the Hash algorithm to
be used in phase 1.
(auto setting)
• MD5
• SHA1
• SHA256
• SHA384
• SHA512
Phase 1
Encryption Algorithm
Specify the encryption
algorithm to be used in phase
1.
(auto setting)
• DES
• 3DES
• AES-128-CBC
• AES-192-CBC
• AES-256-CBC
Phase 1
Diffie-Hellman Group
Select the Diffie-Hellman
group number used for IKE
encryption key generation.
(auto setting)
• 1
• 2
• 14
Phase 1
Validity Period
Specify the time period for
which the SA settings in phase
1 are valid.
Set in seconds from 300 sec.
(5 min.) to 172800 sec. (48
hrs.).
5. Enhanced Network Security
154

Ricoh MP C2003 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Size	A3
Copy Resolution	600 x 600 dpi
Duplex Printing	Yes
Print Technology	Laser
Print Speed	20 ppm (A4)
Scanner Resolution	600 dpi
Network Connectivity	Ethernet
Functions	Print, Copy, Scan
Operating System Compatibility	Windows, Mac, Linux
Scan Speed	54 images per minute
Control Panel	9-inch color touchscreen