Printing Using the Optional 30 Originals Document Feeder
49
2
C
Press the {
{{
{q
qq
q}
}}
} key.
This stores the number of prints to be made for the first original in memory 1.
Note
❒ When the number of prints in each set is the same, it is not necessary to in-
put the number of prints for each group in memory. Simply select Auto
Cycle mode and enter the desired number of prints once.
D
Set your originals face up into the document feeder.
Note
❒ When you use the optional 30 originals document feeder, the originals are
fed from the bottom of the stack. Make sure that the originals are set in the
correct sequence with the first original on the bottom.
E
Press the {
{{
{
Start
}
}}
} key.
TSLS01JE
TSLH013E
TSLS012E
SilverV-gb.book Page 49 Monday, May 15, 2000 3:32 PM
To Next Page
Loading...
