Optional Functions
50
2
F
Check the image position of the trial or proof print.
Note
❒ If the image position is not correct, adjust it using the {
Image Position
} keys
(see ⇒ P.9 “Shifting the Print Image Position Forward or Backward”) or the
side tray fine adjusting dial (see ⇒ P.10 “Shifting the Print Image Position to
the Right or Left”).
G
Turn on the optional tape dispenser power switch.
H
Press the {
{{
{
Auto Cycle
}
}}
} key.
Note
❒ In Auto Cycle mode, printing starts automatically after a trial print is de-
livered.
TSLP013E
On
Off
SilverV-gb.book Page 50 Monday, May 15, 2000 3:32 PM
To Next Page
Loading...
