Ricoh PRO C751 - Expansion and Contraction (2)

105
4.8.11 Expansion and Contraction (2)
The leading edge margin is too wide and the image has stretched lengthwise.
Paper feed direction
Original
Output
CEZ530
Cause:
The paper feed speed of the transfer timing roller is too high.
Solution:
Increase the feed speed of the transfer timing roller.
1.
In [Advanced Settings] for the custom paper in use, select [20: Transfer
Timing Roller Feed Speed Adj] and increase the value by 0.1%.
2.
Print the image. Is the problem resolved?
Yes
Finished!
No
Keep increasing the value by 0.1% until the problem is resolved.
If the problem persists even though you have increased the value by
1.0%, contact your service representative.