Ricoh PRO C751 - Edges of Letter Fold Bent

134
5.2.4 Edges of letter fold bent
When letter folding is applied, the edge of the inner flap may become bent.
CEZ592
Solution:
The solution depends on whether letter folding is applied to multiple sheets or a
single sheet.
<When letter folding is applied to multiple sheets>
1.
Load the paper the other side up.
2.
Print the image. Is the problem resolved?
Yes
Finished!
No
Go to the next step.
3.
In the [Adjustment Settings for Skilled Operators] menu, set [0604: Letter
Fold-in Position 1 (Multi-sheet Fold)] to "0.0 mm".
4.
In [General Features] in [System Settings], set [Letter Fold-in Position] for
multiple sheets to "7 mm".
5.
Print the image. Is the problem resolved?
Yes
Finished!
No
Contact your service representative.