66
3.5 Gloss Problems
3.5.1 Glossy Lines
Glossy lines appear every 20 or 26.5 mm (0.8 or 1.0 inches).
20 mm or 26.5 mm
(0.8 or 1.0 in.)
CEZ570
Cause:
This may occur if coated or thin paper is used.
Note:
• To adjust the following settings, pre-register the type of paper in use as a custom
paper. For details about registering custom papers, see "Registering a Custom
Paper", Paper Settings Reference.
• If the glossy lines appear at irregular intervals, you cannot resolve the problem
with this procedure. Contact your service representative.
• Decreasing the fusing temperature may produce one or more of the following
side effects:
• Insufficient toner fusing
• Insufficient gloss
• Halftone images on uncoated paper are soiled
To Next Page
Loading...
