62
3.4.12 Broken Thin Lines
Thin lines (1 dot lines in 1200 dpi images) break.
CEZ569
Cause:
Oblique (approximately 45°) thin lines or thin lines printed in faint colors are likely
to contain breaks.
Solution:
1.
In the [Adjustment Settings for Skilled Operators] menu, execute [0201:
Adjust Image Density].
2.
Print the image. Is the problem resolved?
Yes
Finished!
No
Go to the next step.
3.
Increase the value by 1 for all colors in [0204: Adjust Line Width].
4.
Execute [0201: Adjust Image Density].
5.
Print the image. Is the problem resolved?
Yes
Finished!
No
Repeat Steps 3 to 5. If the problem persists even if you increase the
value to 5, contact your service representative.
To Next Page
Loading...
