Ricoh PRO C751 - Color Is too Dense

61
3.4.11 Color Is Too Dense
The entire image is denser than normal.
CEZ568
Cause:
This may occur if:
• Continuously printing an image that consumes much toner
• The machine has not been used for a long time
• The machine is located somewhere very humid and has not been used for a
while
Solution:
1.
In the [Adjustment Settings for Skilled Operators] menu, execute [0201:
Adjust Image Density].
2.
Print the image. Is the problem resolved?
Yes
Finished!
No
Go to the next step.
3.
Decrease the value by 1 for all colors in [0203: Adjust Maximum Image
Density].
4.
Execute [0201: Adjust Image Density].
5.
Print the image. Is the problem resolved?
Yes
Finished!
No
Repeat Steps 3 to 5. If the problem persists even if you decrease the
value to -5, contact your service representative.