109
4.8.14 The Leading/Trailing Edge Margin Is Long
Cause:
In some custom paper presets, the leading/trailing edge margins are wide enough
to prevent paper jams.
Paper feed direction
Leading-edge margin Trailing-edge margin
CEZ586
Solution:
Adjust the leading/trailing edge margins.
1.
In [Advanced Settings] for the custom paper in use, reduce the value by 0.5
mm in [13: Adjust Erase Margin of Leading Edge].
2.
Reduce the value by 0.5 mm in [14: Adjust Erase Margin of Trailing Edge].
3.
Print the image. Is the problem resolved?
Yes
Finished!
No
If this results in a paper jam during duplex printing, restore the previous
setting.
Note:
• The adjusted margin cannot be applied to masked images that are solid-filled or
contain ruled lines at the leading/trailing edges.
• Reducing the leading/trailing edge margin may result in a paper jam on the
fusing belt stripper plate.
To Next Page
Loading...
