Ricoh PRO C751 - Cleaning the Paper Feed Path in the Multi Bypass Tray (Tray 6)

116
9. After cleaning, restore the machine so that it resumes operation.
Note:
• For details about the general and periodic cleaning of the machine, see the
Replacement Guide.
4.10.2 Cleaning the Paper Feed Path in the Multi Bypass Tray
(Tray 6)
Clean the guide board and paper feed rollers in the multi bypass tray (Tray 6).
Wipe the guide board with a well-wrung-out damp cloth. To clean the innermost
recesses, use a cloth that is as large as your palm.
1. Remove the loaded paper.
2. Clean the side fences and front guide.
CEZ587
3. Pull off the snap-off cover.
CEZ168