65
Procedure 2: Printing black using four colors (YMCK) in full-color mode
Do the following on the Command WorkStation (CWS).
1.
Select "Properties..." for the image.
2.
Click the "Color" tab.
3.
In "Color mode", select "Expert Settings...".
4.
Click the "Gray & Black Processing" tab.
5.
Set "Black text and graphics:" to "Normal".
6.
Set "CMYK" to "Off".
Black is printed with 4 colors (YMCK).
Note:
• If "Black text and graphics:" is set to "Rich Black On", black can also be
printed in full-color mode.
7.
If the problem persists, contact your service representative.
To Next Page
Loading...
