[Machine: Image Quality]
0201 [Execute Image Quality Adjustment]
Execute the following adjustment manually: image density /reduce density diff. in across direction /
reduce density diff. in feeding direction / reduce color dispersion.
Setting Items Remarks
[Adjust All] Select to have all adjustments executed.
[Adjust Image Density] Select to adjust the overall image density.
[Density Difference: Across Feed] Select to adjust the density difference in the
direction perpendicular to the paper feed
direction.
Unlike [Density Difference Printing: Across Feed],
this does not include printing for adjustment, but
the achieved accuracy is slightly lower.
[Density Difference: With Feed] Select to adjust the density difference in the paper
feed direction.
[Color Registration] Select to adjust the color registration.
0202 [Maximum Image Density]
Adjust maximum image density for each color. Use [+] or [-] to increase or decrease adhesion amount.
After the setting change, the image density is adjusted automatically before print start.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Black] 0 5 -5 1 None
[Cyan]
[Magenta]
[Yellow]
[Machine: Image Quality]
11
To Next Page
Loading...
