Ricoh Pro C9500 - 0203 [Line Width]; 0204 [Fusing Temperature on Standby]

0203 [Line Width]
Adjust the laser beam for image data writing. Halftone dot and fine line becomes thicker when the laser
beam increases. After setting change, image density is adjusted automatically before print start.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Black] 0 5 -5 1 None
[Cyan]
[Magenta]
[Yellow]
0204 [Fusing Temperature on Standby]
Set the fusing temperature for each standby status.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Heat Roller: On Standby] 163 200 100 1 deg
[Pressure Roller: On Standby] 50 30
[Heat Roller: On Low Power] 80 0
2. Details of Menu Items in Adjustment Settings for Skilled Operators
12