[Machine: Paper Feed/Output]
0301 [Detect JAM048]
Set ON/OFF for JAM048 (detect paper jam by detection error of image position correction mark).
Setting Item Values Default Value
[Setting] [Off]
[On]
[On]
0302 [Remaining Paper Output Tray When Misfeed Occurs]
If a paper jam occurs, the paper remaining inside the machine is delivered to the selected paper tray.
If there is any properly printed paper delivered to the selected paper tray, take note that the paper
delivered due to the paper jam will pile on top of it.
Setting Items Values Default Value
[Finisher Shift Tray 1] [Off]
[On]
[Off]
[Stacker Upper Tray]
[Second Stacker Upper Tray]
0303 [Paper End Setting When Near End]
Specify whether to detect paper running out when remaining paper is low.
[Machine: Paper Feed/Output]
13
To Next Page
Loading...
