0606 [Punch Position: Across Feed]
Adjust the position (top and bottom) of the punch holes in the vertical direction. Use [+] or [-] to move
punch hole up or down.
This function can be used with Finisher or Booklet Finisher.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[2 Holes JP/EU] 0.0 2.0 -2.0 0.5 mm
[3 Holes US]
[4 Holes EU]
[4 Holes NE]
[2 Holes US]
0607 [Punch Position: With Feed]
Adjust the position of the punch holes in the feeding direction. Use [+] to move away from the back end,
and [-] to move toward the back end.
This function can be used with Finisher or Booklet Finisher.
2. Details of Menu Items in Adjustment Settings for Skilled Operators
34
To Next Page
Loading...
