Ricoh Pro C9500 - [Finishing: Finisher]; 0601 [Staple Position for Booklet]

88 pages

To Next Page

To Previous Page

[Finishing: Finisher]

0601 [Staple Position for Booklet]

Adjust the position of the Saddle Stitch Staple. In left and right spread status, move to right with [+] and

to left with [-].

This function can be used with Booklet Finisher.

[Finishing: Finisher]

Main Page

Table of Contents3
Paper Feed Direction of Printed Copies (Side 1/Side 2)7
Adjustment Settings for Skilled Operators9
Accessing the Adjustment Settings for Skilled Operators Menu9
Details of Menu Items in Adjustment Settings for Skilled Operators11
[Machine: Image Position]11
0101 [Perpendicularity Adjustment]11
0102 [Auto Adjust Image Position: Number of Printed Sheets]11
0103 [Auto Adj Img Posit: Magnification Adjustable Range: with Feed]12
[Machine: Image Quality]13
0201 [Execute Image Quality Adjustment]13
0202 [Maximum Image Density]13
0203 [Line Width]14
0204 [Fusing Temperature on Standby]14
[Machine: Paper Feed/Output]15
0301 [Detect JAM048]15
0302 [Remaining Paper Output Tray When Misfeed Occurs]15
0303 [Paper End Setting When Near End]15
0304 [Auto Continue Paper Feeding]16
[Machine: Productivity]17
0401 [Number of Sheets for Auto Color Selection]17
0402 [Print Mode When Switching Paper Type]17
[Machine: Maintenance]18
0501 [Execute Cleaning Initial Setting for PCU]18
0502 [Wind Fuser Cleaning Unit at Replacement]18
0503 [Temperature/Humidity Inside]18
0504 [Temperature/Humidity Outside]19
0505 [Screw-On Cap to Replace]19
0506 [Execute Developer Refreshing]20
0507 [Execute Photoconductor Refreshing]20
0508 [Execute Charger Unit Cleaning]20
0509 [Execute Cleaning Initial Setting: Paper Transfer Unit]21
0510 [Fusing Belt Smoothing Setting]21
0511 [Smooth Fusing Belt]22
0512 [Fusing Belt Smoothing Execution Time]22
0513 [Fusing Belt Smoothing Setting (Set by User)]22
0514 [Manage Multiple Fusing Units by Counter]22
0515 [Display System Message for When Outside Optimal Range]28
[Finishing: Finisher]29
0601 [Staple Position for Booklet]29
0602 [Folding Position for Booklet]30
0603 [Staple Position: Across Feed 1]33
0604 [Staple Position: Across Feed 2]34
0605 [Staple Position: with Feed]35
0606 [Punch Position: Across Feed]36
0607 [Punch Position: with Feed]36
0608 [Paper Alignment for Booklet: Across Feed]37
0609 [Set Number of Folds for Booklet]38
0610 [Feed Amount of Folding Roller for Booklet]39
0611 [Paper Alignment for Booklet: with Feed]40
0612 [Paper Alignment for Stapling: Across Feed: 1St Time]42
0613 [Paper Alignment for Stapling: Across Feed: 2Nd Time]43
0614 [Paper Alignment for Stapling: Weight: Across Feed: 1St Time]43
0615 [Paper Alignment for Stapling: Weight: Across Feed: 2Nd Time]44
0616 [Paper Alignment in Shift Tray: Across Feed]45
0617 [Paper Alignment for Stapling: with Feed: 1St Time]46
0618 [Paper Alignment for Stapling: with Feed: 2Nd Time]47
0619 [Paper Alignment for Stapling: Weight: with Feed: 1St Time]48
0620 [Paper Alignment for Stapling: Weight: with Feed: 2Nd Time]49
0621 [Punch Skew Correction]50
0622 [Z-Fold Skew Correction]50
0623 [Amount of Z-Fold Skew Correction]51
0624 [Amount of Z-Fold Skew Correction: Reverse]51
0625 [Amount of Punch Skew Correction]52
0626 [Paper Alignment in Shift Tray Setting]52
0627 [Paper Alignment in Shift Tray Setting: Stapled Signature]53
0628 [Paper Alignment in Shift Tray Setting: Thin Paper]53
0629 [Number of Sheets Align for Stapling]53
0630 [Output Tray Descending Position]54
0631 [Output Trail Edge Press Setting]55
0632 [Output Fan Setting]55
0633 [Output Fan Level]55
0634 [Maximum Number of Stacked Sheets in Output Tray]56
0635 [Max Number of Stacked Sheets in Output Tray: Stapled Signature]56
0636 [Maximum Number of Stacked Sheets in Output Tray: Envelope]57
0637 [Staple Tray: Rib Installed Mode to Strengthen Paper]57
0638 [Accuracy Priority for Stapling]58
0639 [Accuracy Priority for Booklet]58
0640 [Convert Number of Sheets for Booklet]58
0641 [Paper Alignment Gap for Stapling]59
0642 [Paper Alignment Angle on Shift Tray]60
0643 [Prevent Misdetection of Punched Hole]61
0644 [Max Number of Stacked Sheets in Output Tray: Letter Fold Paper]61
[Finishing: Fold]62
0701 [Z-Fold Position 1]62
0702 [Z-Fold Position 2]62
0703 [Half Fold Position]63
0704 [Letter Fold-Out Position 1: 1 Sheet Fold]64
0705 [Letter Fold-Out Position 1: Multi-Sheet Fold]65
0706 [Letter Fold-Out Position 2: 1 Sheet Fold]66
0707 [Letter Fold-Out Position 2: Multi-Sheet Fold]66
0708 [Letter Fold-In Position 1: 1 Sheet Fold]67
0709 [Letter Fold-In Position 1: Multi-Sheet Fold]68
0710 [Letter Fold-In Position 2: 1 Sheet Fold]68
0711 [Letter Fold-In Position 2: Multi-Sheet Fold]69
0712 [Folding Unit Tray Full Detection]70
[Finishing: Perfect Binder]71
0801 [Cover Sheet Position for Perfect Binding: Across Feed]71
0802 [Cover Sheet Position for Perfect Binding: with Feed]71
0803 [Perfect Binding Finishing Angle]71
0804 [Applying Binding Glue]73
[Finishing: Stacker]74
0901 [Paper Alignment in Stacker Tray: Across Feed 1]74
0902 [Paper Alignment in Stacker Tray: Across Feed 2]75
0903 [Paper Alignment in Stacker Tray: with Feed]75
0904 [Paper Alignment in 2Nd Stacker Tray: Across Feed 1]76
0905 [Paper Alignment in 2Nd Stacker Tray: Across Feed 2]77
0906 [Paper Alignment in 2Nd Stacker Tray: with Feed]78
0907 [Maximum Stack Quantity in Stacker Tray]79
[Density Difference Printing: Across Feed]81
[Finishing: Interposer]82
2101 [Detect JAM573]82
2101 [Detect JAM574]82
2102 [Interposer Fan Setting]82

Ricoh Pro C9500 - [Finishing: Finisher]; 0601 [Staple Position for Booklet]

Table of Contents

Other manuals for Ricoh Pro C9500

Related product manuals