Ricoh Pro C9500 - 0623 [Amount of Z-Fold Skew Correction]; 0624 [Amount of Z-Fold Skew Correction: Reverse]

0623 [Amount of Z-fold Skew Correction]
Adjust the striking amount of paper during Z-folding skew correction. [-] reduces the striking amount.
Specify this setting if the skew correction for z-folding causes a problem.
At the default value of "0.0", the sheets are brought flush against the guide by 7 mm. You can reduce
this value by [-] down to [-7.0] (0 mm).
This function can be used with Finisher or Booklet Finisher.
Setting Item
Default
Value
Max.
Value
Min.
Value
Step Unit
[Setting] 0.0 0.0 -7.0 0.5 mm
0624 [Amount of Z-fold Skew Correction: Reverse]
Adjust the reverse rotation amount of Registration Roller during Z-folding Skew Correction. [-] reduces
the reverse rotation amount.
Specify this setting if the skew correction for z-folding causes a problem.
At the default value of "0.0", the amount of reverse rotation is 3 mm. You can reduce this value by [-]
down to [-3.0] (0 mm).
This function can be used with Finisher or Booklet Finisher.
Setting Item
Default
Value
Max.
Value
Min.
Value
Step Unit
[Setting] 0.0 0.0 -3.0 0.5 mm
[Finishing: Finisher]
49