• Performing this once may not be sufficient to clean completely. After the cleaning is executed,
check for any problems with the print image and perform this again as required.
• Image density may fluctuate after cleaning execution. After the cleaning is executed, make sure that
there are no problems with the print image, and then perform [Adjust Image Density] in [Execute
Image Quality Adjustment].
Setting Items Remarks
[All Colors] Press [Execute].
[Black]
[Cyan]
[Magenta]
[Yellow]
0509 [Execute Cleaning Initial Setting: Paper Transfer Unit]
Execute after replacing the Paper Transfer Unit.
Setting Item Remarks
[Execute] Press [Execute].
0510 [Fusing Belt Smoothing Setting]
Set the conditions for Fusing Belt smoothing.
Setting Item Values Default Value
[Auto Execute Belt Smoothing: For Belt Scratches] [Do not Auto Execute]
[Automatic Execution]
[Automatic Execution:
Frequently]
[Automatic Execution:
Set by User]
[Automatic Execution]
[Machine: Maintenance]
19
To Next Page
Loading...
