Ricoh S-P2 - Page 102

5804 021 Transfer minus -
5804 022 Bank1 Motor Paper Tray Motor-1st Opt. Paper Tray
5804 024 Bank2 Motor Paper Tray Motor-2nd Opt. Paper Tray
5804 026 No2 CL Paper Feed Clutch-2nd Opt. Paper Tray
5804 027 No3 CL Paper Feed Clutch-3rd
5804 028 Dplx Mt Normal Duplex Inverter Motor-forward
5804 030 Dplx Mt Revers(e) Duplex Inverter Motor-reverse
5804 032 Dplx Mt Long Duplex Transport Motor
5804 034 Dplx Split SOL Inverter Gate Solenoid
5810
Fusing Err Clr
Resets an SC code for a fusing unit error.
After using this SP mode, turn the main switch off and on.
5811 Machine No. Sett DFU
Used to input the machine serial number. This is normally done at the factory.
5812
Tel. No. Setting
Use these SP modes to input service and support telephone numbers. Enter the number
and press [#Enter].
5812 1 Service
Use this to input the telephone number of the CE printed on the SP print
mode printout.
5812 2 Fax Tel No.
Use this to input the fax number of the CE printed on the SP print mode
printout.
5816 Remote Service
5816 001
I/F Setting
Selects the remote service setting.
[0 or 2 / 2 / 1 /step]
5. Service Tables
100
5